Engenius EAP1300EXT

Frequency Radio

• 2.4GHz: 2400MHz ~ 2835MHz,
• 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz
• Support radios and channels will be varied on the configured regulatory domain.
• Supported Radio Technology
• 802.11b: Direct-sequence spread-spectrum (DSSS)
• 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM)
• 802.11n/ac: 2x2 MIMO with 4 streams
• 802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz
• 802.11n supports high throughput (HT) — HT 20/40 MHz
• 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM)
• 802.11n/ac packet aggregation: A-MPDU, A-SPDU

Supported Modulation Type

• 802.11b: BPSK, QPSK, CCK
• 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
• Transmit Power (Maximum Value)
• 2.4GHz: 21dBm
• 5GHz: 21dBm
• Maximum power is limited by regulatory domain
• Tx Beamforming (TxBF)
• Increasing signal reliability and transmitting distance.

Supported data rates (Mbps)

• 802.11b: 1, 2, 5.5, 11
• 802.11a/g: 6, 9, 12, 18, 36, 48, 54
• 802.11n: 6.5 to 300 (MCS0 to MCS15)
• 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2)

Power

• Maximum Power Consumption10W
• Power Source
• Direct DC Input: 12V/1A
• Power Over Ethernet: 802.3af Input

Antenna

• EAP1300: (Integrated Antenna)
• 2.4GHz: 5 .0 dBi
• 5GHz: 5.0 dBi
• EAP1300EXT: (External Antenna)
• 2.4GHz: Two detachable 5.0dBi RP-SMA antennas
• 5GHz: Two detachable 5.0dBi RP-SMA antennas

 

Interfaces

• Networking Interface
  One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports
  DC Powering Interface
• One (1) DC Jack interface

LED Indicators

Display system and wireless transmission status

• Reset Button
• Convert Access Point to the Factory default or the Users Default

 

Traffic Shaping

• Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point.
• MAC Address Filtering
• Filter up to 64 sets MAC addresses per SSID
• E-Mail Alert
• Provides a network monitoring tool for administrators to stay informed the configuration change.
• Finger Printing
• The value added solution collect information of client devices including name of devices, IP address, MAC address, Operating system version, transmitting and receiving data, and signal level.
• Save Configuration as Users Default
• Save the customized configuration as default value for different customer demands.
• Wi-Fi Scheduler
• Perform a regular reboot on access point at assigned schedule
• Perform it to enable or disable 2.4GHz or 5GHz interface from a period time.
• SNMP &MIB
• v1/v2c/v3 support
• MIB I/II, Private MIB
• CLI supported
• RADIUS Accounting
• Help operators to offload 3G to Wi-Fi seamlessly
• Wireless Clients list
• Provide the list to display real status of wireless client devices on this Ac-cess Point.
• Comprehensive Protection
• Wireless Encryption Standard
• Hide SSID in beacons
• Rogue AP Detection
• Enable the function to detect the fake access points in the environment.
• L2 Isolation
• Block the communication between the associated clients to communi-cate with other clients from all hosts on the same subnet.
• Client Isolation
• Block/Isolate the communication between the associated clients under the same WLAN.
• HTTPS
• A secure communication protocol can be enabled to allow secure man-agement web access over a computer network.
• SSH Tunnel
• A secure communication protocol can be enabled to allow secure remote shell access or command execution.